Lines open now — emergency service available 24/7 Serving Atlanta, GA & surrounding ZIP codes (678) 940-0457
Atlanta Garage Door Pros logo Atlanta Garage Door ProsAtlanta, GA (678) 940-0457

Atlanta, GA • Gate Repair

Gate Alignment in Atlanta, GA

Gate alignment is the service of correcting a gate that sags, drags on the ground, swings unevenly, or will not latch because its hinges, posts, or track have shifted. Gates go out of alignment when posts settle in soft soil, hinges wear, or a vehicle clips the frame. A pro fixes it by resetting posts, replacing or adjusting hinges, shimming the frame, and tuning the latch and opener so everything lines up again.

Atlanta's clay soil expands and shrinks with the seasons, which slowly pushes gate posts out of plumb, and heavy spring rains speed up the settling. A dragging gate only gets worse if ignored. When you call, we connect you with an independent local pro who can realign your gate and give you a free estimate.

Craftsman home with a carriage-style garage door

This service is part of our broader gate repair in Atlanta coverage — see the main guide for related repairs, installations, and pricing.

What Gate Alignment Includes

The pro checks the gate the way a carpenter checks a door, looking at the gaps at the top, middle, and bottom to see where it has dropped. Posts that have leaned are dug out, reset plumb, and re-set in concrete so the fix lasts. Hinges are adjusted or swapped, the latch is lined up with its strike plate, and the opener is retested so the motor is not fighting a crooked gate.

  • Inspection of posts, hinges, frame, and latch points
  • Post resetting and re-plumbing where soil has shifted
  • Hinge adjustment or replacement
  • Track cleaning and roller alignment for sliding gates
  • Latch and strike-plate realignment
  • Opener and safety-sensor retesting after alignment

Signs Your Gate Needs Alignment

Scraping sounds as the gate moves, a visible lean, or a latch that only catches if you lift the gate are all alignment problems. Sliding gates that jump the track or bind halfway have roller or track misalignment. If your opener strains or the gate reverses for no reason, a crooked gate may be overloading the motor and sensors.

What Happens When You Call

Call (678) 940-0457 and describe the symptoms, like dragging or a latch that will not catch. We will connect you with an independent local pro who can inspect the gate, find what shifted, and explain the fix. You get a free estimate before any work starts, so there are no surprises.

Related services

Need gate alignment in Atlanta?

Call now for a free estimate — we'll connect you with a local pro. You can also explore our main Atlanta garage door services hub.

Call (678) 940-0457

Good to know

FAQs

Yes, most sagging gates can be saved by resetting posts, upgrading hinges, or adding a diagonal brace. Full replacement is only needed when the frame itself is rotted or bent beyond repair. The pro will tell you honestly which one your gate needs.

Repeated settling usually means the posts were set too shallow or without enough concrete for the soil. Atlanta clay is especially prone to movement. A proper reset with deeper footings usually ends the cycle.

Often, yes: a misaligned gate forces the opener to work harder, which causes stalls, reversals, and early motor wear. Once the gate moves freely, many opener symptoms disappear. The pro retests everything after the alignment.

Gate Alignment — call now

Tell us what's wrong with your garage door and we'll connect you with a local professional who can help — often the same day. Free estimates, no obligation.

(678) 940-0457
Call Now — It's Free
Tap to Call (678) 940-0457